This option has 2 output bins, a lower standard bin (1) with no staple or offset functions and an upper Bin (2) for stapled, punched and / or offset jobs. The standard bin supports up to 500 sheets of paper (20 lb., 75 gsm) in A4, A5, JIS-B5, Legal, Letter, Folio, Executive and Statement sizes. Paper (16 to 47 lb., 60 to 176 gsm), specialty paper, card stock, labels, transparencies and envelopes may be used in the standard bin. The jobs are collated in this bin. Bin-2 supports up to 500 sheets of paper (20 lb., 75 gsm) or up to 10 stapled sets of 50 sheets each. Stapling is supported for only paper (16 to 32 lb., 60 to 120 gsm) in A4, Letter, Legal and Folio sizes. The staple position is in the upper left-hand corner (feed direction). Punching is supported for only paper (16 to 32 lb., 60 to 120 gsm) in A4, JIS-B5, Letter, Executive and Folio sizes. Three hole punch modes are supported; 2-hole, 3-hole and 4-hole. Offset output is supported in Bin-2 for A4, A5, JIS-B5, Legal, Letter, Folio, Executive and Statement sizes. Both bins support bin 'near full' and 'full' sensing. Staple 'near empty' and 'Empty' are supported.